Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Vegetable oil can be used as a base oil in minimal quantity of lubrication(MQL). This study compared the performances of MQL grinding by using castor oil, soybean oil, rapeseed oil, corn oil, sunflower oil, peanut oil, and palm oil as base oils. A K-P36 numerical-control precision surface grinder was used to perform plain grinding on a workpiece material with a high-temperature nickel base alloy. A YDM–III 99 three-dimensional dynamometer was used to measure grinding force,and a clip-type thermocouple was used to determine grinding temperature. The grinding force, grinding temperature, and energy ratio coefficient of MQL grinding were compared among the seven vegetable oil types. Results revealed that(1) castor oil-based MQL grinding yields the lowest grinding force but exhibits the highest grinding temperature and energy ratio coefficient;(2) palm oil-based MQL grinding generates the second lowest grinding force but shows the lowest grinding temperature and energy ratio coefficient;(3) MQL grinding based on the five other vegetable oils produces similar grinding forces, grinding temperatures, and energy ratio coefficients, with values ranging between those of castor oil and palm oil;(4) viscosity significantly influences grinding force and grinding temperature to a greater extent than fatty acid varieties and contents in vegetable oils;(5) although more viscous vegetable oil exhibits greater lubrication and significantly lower grinding force than less viscous vegetable oil, high viscosity reduces the heat exchange capability of vegetable oil and thus yields a high grinding temperature;(6) saturated fatty acid is a more efficient lubricant than unsaturated fatty acid; and(7) a short carbon chain transfers heat more effectively than a long carbon chain. Palm oil is the optimum base oil of MQL grinding, and this base oil yields 26.98 N tangential grinding force,87.10 N normal grinding force, 119.6 °C grinding temperature, and 42.7% energy ratio coefficient.     

用腐蚀损伤计算金属日历寿命的原理和模型

通过对金属腐蚀T-H曲线和温湿谱的腐蚀损伤研究,找到一种用腐蚀损伤计算金属日历寿命的原理和模型。这种计算金属日历寿命的模型,只要给出真实使用环境下的腐蚀T-H曲线和温湿谱,就可计算出金属真实使用日历寿命。通过对30CrMnSiA钢的日历寿命实例计算结果与真实环境下的腐蚀试验结果的比较得到,相对误差是17.5%,这说明该日历寿命计算模型和方法是有效的。     

一种高精度多路温度采集方法研究

惯性平台系统是一种框架系统,主要包括平台本体、电路箱和电源箱.平台系统精度主要靠安装在平台本体的三浮陀螺和加速度计来保证.通常惯性平台的工作环境比较严酷,惯性传感器对温度有很高的敏感度,在系统正常工作时,平台内部有二级温控来保证仪表有良好的工作环境,但内部空间温度梯度变化会影响惯性传感器的精度.在温度采集过程中,铂电阻存在非线性、自热效应及热电动势等电气干扰的精度影响.采用阻值比较法,通过引入恒定激励电流来抑制温度采集电路的自热效应,并基于FPGA设计并行多通道温度采集电路.给出了系统总体设计方案、测温电路参数设计、序列激励电流控制和数字滤波补偿的具体实现方式,测试结果表明该系统可实现64路温度采集,在一定范围内测温精度能达到±0.02℃,满足精度要求.     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

基于I~2C总线的CPU温度监控系统

随着高性能、高功耗器件在嵌入式领域中广泛应用,温度监控已成为高可靠嵌入式领域研究的热点,采用ADI公司的测温电路ADT7461设计了面向高性能PowerPC处理器的温度监控系统。介绍了ADT7461芯片的功能原理,描述了整个硬件电路的结构。在软件部分阐述了I2C总线协议以及基于I2C总线协议实现的ADT7461寄存器读/写基本操作,针对应用中会面临的实际问题给出了具体解决方法。设计方法对于同类温度监控系统设计有一定的参考意义。     

细长杆降低超声速客机气动噪声的数值分析

在超声速客机机头加装适当的细长杆可以降低飞行噪声。本文借助基于AUSM+格式的准三维数值模拟手段对7组13种细长杆方案做了分析比较,总结出了近场气体参数与远场气体参数之间的关系的规律。文章还从气体动力学理论和激波理论出发,对数值模拟结果作了解释,并揭示了细长杆降噪效果与细长杆外形的内在联系,以及近场、远场两者关系的经验公式。文章从各种方案中选取了降噪效果较好的细长杆方案做三维流场分析,并通过流固耦合计算对其结构强度做了校核,验证了方案的可行性。     

高温升直流燃烧室燃烧特性数值研究

为了研究高温升直流燃烧室燃烧特性,建立了带三级涡流器的高温升直流燃烧室物理模型,采用稳态雷诺平均N-S方程的化学反应流数值模拟的方法,开展Ⅱ、Ⅲ级径向涡流器旋向、主燃孔和掺混孔特征参数对高温升直流燃烧室的流场及燃烧特性的影响研究。涡流器能够实现火焰筒头部回流区的产生,同时实现主油路燃油的气动雾化和掺混。主燃孔的射流影响回流区的结构,同时主燃孔射流部分进入主燃区,能够保证主燃区的油气比。掺混孔的射流轨迹影响掺混区的流场和出口温度分布。10种方案燃烧室的温升和总压损失系数均达到设计要求,Mode-1-tx、Mode-3、Mode-3-tx、Mode-4-tx四种方案燃烧室周向温度分布系数(Overall temperature distribution factor,OTDF)达标,而径向温度分布系数(Radial temperature distribution factor,RTDF)略高于设计指标,Mode-5-tx方案燃烧室出口温度系数OTDF=0.178和RTDF=0.061均达标,燃烧室出口温度分布品质较好。     

Shock protection of penetrator-based instrumentation via a sublimation approach

It is often necessary for space-borne instrumentation to cope with substantial levels of shock acceleration both in the initial launch phase, as well as during entry, descent and landing in the case of planetary exploration. Current plans for a new generation of penetrator-based space missions will subject the associated on-board instrumentation to far greater levels of shock, and ways must therefore be found to either ruggedize or else protect any sensitive components during the impact phase. In this paper, we present an innovative method of shock protection that is suited for use in a number of planetary environments, based upon the temporary encapsulation of said components within a waxy solid which may then be sublimated to return the instrument back to its normal operation. We have tested this method experimentally using micromachined silicon suspensions under applied shock loads of up to 15,000g, and found that these were able to survive without incurring damage. Furthermore, quality factor measurements undertaken on these suspensions indicate that their mechanical performance remains unaffected by the encapsulation and subsequent sublimation process.     

介质阻挡放电等离子体的温度测量

在空气介质阻挡放电中,利用氮分子振动谱线和氮分子离子的转动谱线,研究了振动温度和转动温度在两极板间的分布情况。结果表明：越靠近极板振动温度越小,中间振动温度最高;而转动温度在两极板间基本保持不变。     

某型飞机座舱温度调节系统检测仪的研制

为满足某型飞机座舱温度调节系统原位检测的需要，结合外场实际．研制了该型飞机的座舱温度调节系统检测仪。经用户使用证明．该检测仪能够满足飞机的检测需要。